Results 1 to 3 of 3
Thread: Camaro work order
-
01-15-2023 #1
Registered User
- Join Date
- Jun 2009
- Location
- From Wasilla, AK. Now portland, OR
- Posts
- 172
Camaro work order
so time has come the start some metal work on the 69 camaro. i have DSE mini tubs, subframe connectors and spring pocket brackets to install. is there a recommended install order?
also i picked up a miller 211 mig to do some of the welding. do you have any recommended setting's on it? i normally try to tig everything but i know it would be difficult to install these parts.
thanks
1970 Elcamino ls3/t56, ricks/vaporworx, sc&c afx ,forgeline zx3, kore3 z51/ls1
1969 Camaro ls3/t56, ricks/vaporworx, ride-tech,forgeline ga3,
2024 ford maverick
-
01-15-2023 #2
Registered User
- Join Date
- Jul 2019
- Posts
- 34
My Miller MIG has a table in the cover that recommends settings for different wire sizes/metal thicknesses. If yours doesn't, I'd try the website.
01-16-2023 #3
Registered User
- Join Date
- Aug 2007
- Posts
- 741
I also have a 211 Miller with auto set. 90% of the time I run .030 wire. Mostly 110 volt.
The auto set is pretty close most of the time. I go manual settings when I'm welding something like 1/8" to a 1/4" piece.
I was just looking thru an older Hot Magazine (around 2011?) and they did a complete tech article on the DSE install into the F-Bomb project.
The table is inside the cover you open up to replace the wire spool.
Reply With Quote
