Results 1 to 20 of 262
Thread: 66 Mustang Restomod Project
Hybrid View
-
08-31-2023 #1
Registered User
- Join Date
- Jun 2017
- Location
- Utah
- Posts
- 240
Avert your eyes if you’re squeamish- Wilwood brake porn ahead. I opted for a set of 13”, ;6 piston up front. These should slow down a pony pretty good.
-
09-02-2023 #2
Registered User
- Join Date
- Jun 2017
- Location
- Utah
- Posts
- 240
I got my front end. Like the back half, it is from Checkered Racing. This is their version of a Mustang II. It came with a power rack, 2” drop spindles, QA1 sway bar and QA1 coil overs with 550# springs. Should be a stiff ride.
09-02-2023 #3
Registered User
- Join Date
- Jun 2017
- Location
- Utah
- Posts
- 240
Made some good progress on the front end. Got the K member welded and shot it with a coat of primer. The steering rack has been mounted and checked out. I took most of it back off because I am concerned with the weight on my homemade rotisserie. I want to paint underneath before I take it off. I have to finish the trunk and mount the fuel tank before that.
09-03-2023 #4
Registered User
- Join Date
- Jun 2017
- Location
- Utah
- Posts
- 240
Started working on the trunk floor. Fairly simple but I need a trap door for the battery well. The big opening is for the fuel cell that I plan to mount flush with the trunk floor.
Reply With Quote
