Results 1 to 4 of 4
Thread: Cowl induction airbox questions.
-
03-04-2021 #1
Registered User
- Join Date
- Aug 2013
- Location
- Shelton WA
- Posts
- 152
Cowl induction airbox questions.
I'm looking to build a air box to enclose my air filter assembly on my 71 Monte Carlo and pull air from the cowl. On the cowl side I will be cutting a hole into the same part of the cowl that the heater and a/c pull air through. Will I have issues with the heat and a/c pulling fuel fumes into the passenger compartment or am I going to have to seal them off from each other?
-
03-19-2021 #2
Registered User
- Join Date
- Aug 2013
- Location
- Shelton WA
- Posts
- 152
03-20-2021 #3
Registered User
- Join Date
- May 2010
- Location
- kitchener,Ontario,Canada
- Posts
- 2,357
I would say yes you would get some fumes , even with a separator. Im not sure if going this route is best . Unless you could somehow pull engine air from the far driver side and hvac from the far passenger side
Spinnin'my tires in life's fast lane
Ryan Austin
On twitter ... soon to be revived ...
On Instagram ryanaustinss70
03-20-2021 #4
Registered User
- Join Date
- Jul 2017
- Location
- Island Lake, IL
- Posts
- 131
You’ll smell it with a carburetor.
Reply With Quote
