Project Anchor (68 Firebird Coupe)

[blitzer454]

Here's how I did the brake lines. I used a Wilwood proportioning valve although I think I'm going to remove the pressure sensor as I don't need it since I already have a brake switch on the pedal assembly.



I also wired up the brake pedal position sensor on the iBooster and got it so there are now only just the 3 wires I need to make it work. I tested the booster using a power supply and all seems to be working properly.





- - - Updated - - -

Applied Lizard Skin to inside of front fenders and wheel housings.