Results 1 to 20 of 77
Hybrid View
-
08-10-2022 #1
Registered User
- Join Date
- Nov 2011
- Location
- Wylie, Texas
- Posts
- 302
Since there isn't enough room to mount the clutch master cylinder under the brake booster I had to place it to the right of the booster which means I will need an extension for the clutch pedal to reach the rod. So I made this from a 1/2" pipe and a bolt some nuts and a washer all welded together.
Here's the completed pedal assembly with extension welded on. I also added a clutch pedal stop, clutch switch (for cruise control and starting engine), some landing pads for the two switches and some new rubber foot pads.
View from inside the car. The pedal travel is perfect for both pedals.
-
Reply With Quote
