Results 1 to 12 of 12
Thread: Frame notching required?
Hybrid View
-
08-16-2020 #1
Registered User
- Join Date
- Apr 2008
- Location
- Virginia Beach VA
- Posts
- 381
This is what it will look like to the inside:
It will be almost touching the frame. You will need to have 3/4" to 1" notched out of the frame and then move the entire wheel well "inside" the same amount. I'm going through this process right now for a 325/30/19 tire. Mine is a little wider but your 6.43" BS on a 20x11 tire will put your tire almost exactly where mine is now to the inside on my 71 442. The good news is you will have more room to the outside so you should be good there. Maybe just roll the outer lip to be safe.
-JoeJoe Lincoln
Lime Green 71 Olds 442 Convertible
Upgrades thread: https://www.pro-touring.com/showthre...ible&highlight=
-
08-16-2020 #2
Registered User
- Join Date
- Sep 2009
- Location
- Atlanta,Ga.
- Posts
- 182
Close touch!
Great job you did there. The body has to come off the frame anyway so it won't be that big of an issue. What guage metal did you use? I will notch it 1" and call it good. Now my concern will be moving the inner fender 1". Hopefully I can just roll it. Don't want to go through the minitub ordeal.
I am SUCH a rookie to Pro-Touring
Reply With Quote
