LS offset?

[Gmachine1911]

I’m building a 67 Chevy II with a DSE front clip and an LS...I was hoping to put power brakes on it, however, after talking to some who’ve done it, and looking at others’ cars, the booster sits very close to the driver side valve cover/coils (if mounted in the factory location) which could be problematic for removing the valve cover. It’d be worth mocking up the engine, headers, brake booster and drive shaft so you know for sure. You could always cut the mounts loose again and reposition. Another thing to consider is that the driveshaft tunnel on those cars is somewhat narrow so you’d wanna be mindful of that if you move the engine side to side. Id love to see some pics of your build and good luck!