Results 1 to 4 of 4
Thread: Dakota digital gauge issue
Hybrid View
-
12-23-2019 #1
Registered User
- Join Date
- Dec 2011
- Location
- new york
- Posts
- 367
Dakota digital gauge issue
Good evening, I have an 85 cutlass that had a 5.3 and working Dakota digital gauge cluster. I swapped out the 5.3 for an ls3 and the same gauge cluster. Everything but the engine and ecu remained the same. I have switch power, constant power and ground, but my gauges do not work. No led on the controller either. Everything seems to be plugged in as before. Any ideas
-
12-23-2019 #2
Registered User
- Join Date
- Aug 2004
- Location
- Jacksonville, FL
- Posts
- 1,666
Did you connect batt, ign and ground to the control panel?
Chris
1968 Chevy Camaro SS
LT4 (coming)/T56 DSE suspension
1969 Oldsmobile Cutlass S convertible (442 Clone)
LS3/4L70e, DSE suspension
12-23-2019 #3
Registered User
- Join Date
- Dec 2011
- Location
- new york
- Posts
- 367
Batt, ign and ground are to the controller, the cat 5 cable is attached to the controller and the gauge.
12-24-2019 #4
Registered User
- Join Date
- Dec 2011
- Location
- new york
- Posts
- 367
Turned out to be a bad cat 5 cable
Reply With Quote
