Pay it Forward-Freebies

[myclone]

I'll throw something in the pile that may help someone out...

1989 350 two bolt 4.00 bore bare block out of a 1500 2wd truck. Factory roller cam bosses are there/drilled and it will possibly need to go .010 over on the cylinders to clean them up (I havent mic'ed it but it looks/feels like minimal bore wear). The bad part is #1 main bearing spun so a line bore will need to be performed to repair.

Its been stored inside my garage so there is minimal/no rust to deal with and IMO would make a decent foundation for a build that will use off the shelf roller cam stuff. Its in my way really but not enough to throw it away so if someone wants it come get it. Due to weight/cost/time constraints I cant ship it.



If someone really wants the stock heads from that same motor I'll throw them in the deal too. Extremely minor bowl work/clean up done and they performed flawless for ~10k miles until an exh valve burned. Theyll need a valve job and valve seals but the guides have minimal wear since the motor only had 87k miles on it to begin with and no cracks or other issues. Great heads for a truck or daily driver IMO since youd spend tons of money with a head porter to get them to flow even close to what unported after market heads would. Ive hung onto them as spares for my trucks but since I have two more sets these can go to someone that could possilby use them.

[Nicks67GTO]

i have a edelbrock 600cfm elec choke carb i just pulled off of my car that i could part with if anyone wants to pick it up in north texas

Hey if you still have that i need it, PM me if you want to part ways with it.

[vanzuuk1]

Young gun , if crazyfireman does not taake the grill I will, mine is cracked.

[vanzuuk1]

Astroracer, I sent the model today.

[Zefhix]

really...really cool thread!
I have a BB chevy Performer 2-0 oval intake in near perfect condition. email me keith at zefhix dot com. Merry Christmas you guys....I'm glad this year is finally almost over.

[harshman]

hey keith....how 'bout a bumper for a 68 camaro?

[Rick Dorion]

I have a pair of small block chevy valve cover spacers - about 1" high for the cost of shipping.

[Zefhix]

hey keith....how 'bout a bumper for a 68 camaro?

I got one sitting here collecting dust if you want it!

[4OfaKind]

I have a rebuildable 700r4 from a Chevy S10. I plan to get a 4L80e so I will let this go if anyone wants it. I live in Vegas.

Merry Christmas



Mal

[jacobgiles]

factory AC setup to anyone who needs it

[68BNUT]

Ive got a 2 speed powerglide sitting in my garage with drive shaft and crossmember, to lazy to ship Somebody come pick it up. Im in the Dallas Fort worth area.

I could use a radio faceplate for a 68 camaro.

[astroracer]

Astroracer, I sent the model today.

Thanks bud, I got it... You spent some coin on the shipping... I will gladly cover it if you want me too.
Mark

[vanzuuk1]

Mark I am glad you got it, it was sitting on a shelf for ten years collecting dust. I only build the 1/12 stuff now. If you ever do any 1/12 parts for models let me know.