The Nemesis (Fox Body Mustang)

[frink84]

welcome fellow fox builder!

i would highly, HIGHLY recommend full-length subframe connectors to your list. i'd even consider them a must-have. foxes are wet noodles, verts are the worst.



IMHO i would only do the tubular k-member if required for your swap. bang for your buck, adressing the 4-link rear and converting it to some sort of phb or watts + torque arm/3-link should be high priority. really changes the characteristics of the car for the better.

[Merritt5]

IMHO i would only do the tubular k-member if required for your swap.

You don't even need to swap out the k member for an ls swap now, Holley has that covered.

https://www.holley.com/products/ls_p...ap_components/


Should be a fun little car!

[Buryingthesun]

welcome fellow fox builder!

i would highly, HIGHLY recommend full-length subframe connectors to your list. i'd even consider them a must-have. foxes are wet noodles, verts are the worst.

IMHO i would only do the tubular k-member if required for your swap. bang for your buck, adressing the 4-link rear and converting it to some sort of phb or watts + torque arm/3-link should be high priority. really changes the characteristics of the car for the better.

Subframe connectors were absolutely on the list. I was looking into swapping the solid rear out for an IRS system. But it sounds like she is more interested in a street cruiser and occasional bully on the highways or strip

- - - Updated - - -

You don't even need to swap out the k member for an ls swap now, Holley has that covered.

https://www.holley.com/products/ls_p...ap_components/


Should be a fun little car!

good call, thank you!