Results 1 to 20 of 71
Thread: 6.0 LS Build
Threaded View
-
11-19-2018 #10
Registered User
- Join Date
- Aug 2007
- Posts
- 730
You might consider L92 heads. Fairly inexpensive. Will need better springs. Also if you have the time pull the pan and check the bearing clearances. Doesn't cost much to do that. New rear main seal. I wouldn't rework a stock harness. Buy a harness and computer from one of vendors on this site. I haven't done a Monte LS swap but I would guess most use an Fbody pan and front end accessories.
-
Reply With Quote
