6.0 LS Build

[pro86tourn]

Here's an option https://www.ebay.com/itm/28325931166...cYRhlKwBRbFfkM

Probably the best seller online you can trust...straight from Holley Performance.

Very nice engine!

So heres where Im at:

-Stock bottom end, just clean it up and let er' eat OR Pull the bottom end apart send to machine shop, new bearings etc put back together stock but freshened up w/ ARP bolts
-Freshen up stock heads with new springs OR Deck the stock heads new springs/valves OR L92 heads
-Need to pick valve train I would like to go with a cam that offers a nice chop but I am horrible at selecting cams (this would depend on the head choice but any advice helps)
-Intake vic Jr or something else (will be only street driven dont want to give away too much overall TQ)
-Carb choice holly or would you guys recommend something different / CFM?

- - - Updated - - -

That's not a bad buy.
If you wanted to rework the harness yourself, here's an excellent resource. http://www.lt1swap.com/2000harness.htm

Thank you!!!!! if I end up going EFI i will certainly use this!!