Results 1 to 14 of 14
Thread: Tranny Angle!!!! Help
Hybrid View
-
12-10-2005 #1
-Moderator/Sponsor-
- Join Date
- Jun 2001
- Location
- Orlando, FL
- Posts
- 10,604
The tranny down angle is usually 2 degrees or so. If you have a stock carb intake manifold, you can measure that since it is usually designed to level the carb with the engine going downhill.
jp
John Parsons
UnRivaled Rides -- Modern upgrades for your ride.
UnRivaled Rides recent project -- LS9-powered 69 Camaro
-
12-10-2005 #2
Banned
- Join Date
- Nov 2003
- Location
- Maine
- Posts
- 1,076
john
that makes no sense and is not what i am asking, well 1/2 of it is.
tranny angle down is yeah usuallyt 2-4 degrees i was wanting to double check, but to measure the stock intake as its made to be level????????? how does that tell me anything about how the subframe sits, other then the manifold was made to level which would mean the carb flange has 2 degrees correction built into it>
thanks but my question was simple and i was only wanting to double check as i can't physically do it and verify it
Reply With Quote
