Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9
    1. #1
      Join Date
      Mar 2008
      Posts
      10

      Billet or solid tie rod sleeves

      I'm rebuilding the steering on my1965 El Camino daily driver. Don't plan on racing it. Are the solid billet steel tie rod sleeves worth the way extra cost over the split steel ones ?
      I planned on using Moog pieces.



      Thanks.


    2. #2
      Join Date
      Jun 2012
      Location
      South Lyon, MI
      Posts
      1,244
      Country Flag: United States
      The billet sleeves are stronger. But I've never seen the factory style sleeves fail.

      However, I went with billet sleeves for peace of mind.

    3. #3
      Join Date
      Apr 2009
      Location
      Michigan
      Posts
      336
      Country Flag: United States
      I prefer the split steel ones. I like being able to see how much of my tie rod I have threaded in and they are easier to deal with if things get super crusty down there (probably not a huge factor on a pampered "toy" car, but it's nice to be able to shoot penetrating oil in there and spread the sleeve a little if stuff gets rusted together).
      - Ryan

    4. #4
      Join Date
      Mar 2009
      Location
      Houston, TX
      Posts
      1,197
      Country Flag: United States
      Billet ones for me. Liberal use of anti seize on the threads. No problem so far (my car is a street car/not pampered at all).
      Tu Ho
      Firebird V2-LS swap

    5. #5
      Join Date
      Apr 2009
      Location
      Michigan
      Posts
      336
      Country Flag: United States
      By pampered toy car I was meaning not regularly driven in snow, salt, dirt roads, etc. The way most of our cars are used I bet either option would be fine for decades corrosion-wise.
      - Ryan

    6. #6
      Join Date
      Oct 2006
      Location
      Pittsburgh Pa.
      Posts
      651
      Country Flag: United States
      I bought a generic pair on e-Bay and I like them a lot. The flats make tuning a snap...
      Attached Images Attached Images  

    7. #7
      Join Date
      Mar 2005
      Posts
      345
      I like the solid sleeves for multiple reasons. Most importantly is that I don't need to deal with positioning the clamps in the correct location. Not doing so can have the clamps hit the frame and bend the tie rods.

      Bob.

    8. #8
      Join Date
      Apr 2001
      Location
      Central CA USA
      Posts
      6,114
      Country Flag: United States
      One problem I see is, the stock tie rod ends don't have fully formed threads. I think they are thread rolled at the factory and those threads are extra fine pitch with not much height. Not a problem with the clamp type tie rod sleeves but threaded sleeves can feel pretty loose until you tighten the jam nuts. I always worry they will come loose, but have never seen a problem with them.
      67 Camaro RS that will be faster than anything Mary owns.

    9. #9
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      Let's also consider the power , speed and tire sizes the factory style were designed for . Any thought about that should make most of us run to the full thread style vs the split style
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70




    Advertise on Pro-Touring.com