Results 1 to 3 of 3
Thread: tight S bend need
-
09-03-2018 #1
Registered User
- Join Date
- Jul 2016
- Posts
- 348
tight S bend need
Anyone have any suggestions on where I can get an "S" bend made up ?? I need a very tight "S" bend to clear my trans x member. The header reducer is about 1 1/2 inches away from the x member and a 1/2 inch too high. I have an LS3 and TKO in a 69 Camaro using Holley motor mounts and a Hurst Driveline x member. Thx
-
09-03-2018 #2
Registered User
- Join Date
- Nov 2006
- Location
- Mountain Springs, Texas
- Posts
- 4,825
Tightest you will get is pie cutting one of these and welding it together:
https://www.ebay.com/itm/Mandrel-Ben...0AAMXQCtlRSL-3
Don1969 Camaro - LSA 6L90E AME sub/IRS
1957 Buick Estate Wagon
1959 El Camino - Ironworks frame
1956 Cameo - full C5 suspension/drivetrain
1959 Apache Fleetside
09-03-2018 #3
Registered User
- Join Date
- Jul 2016
- Posts
- 348
Thank you Don!
Reply With Quote
