Results 1 to 2 of 2
Thread: Ball Joint Pivot Centerline
-
12-03-2005 #1
Registered User
- Join Date
- Sep 2004
- Location
- Prineville, Oregon
- Posts
- 126
Ball Joint Pivot Centerline
Is there a way for me to get the dimensions of the stock ball joints for my '79 cabalero. I was hoping to find an internet site somewhere that has these. I have the frontend completely off the car right now and all the suspension pieces have been cleaned up and powder coated. The motor is out of the car so what better time to measure up everything right? Only problem is I chucked the old ball joints. Help me out here guys and I will be happy to share my dimensions with anybody who has a G body. I think they are all the same?
'79 Z28,White w/camel tan interior,Cowl induction hood,TKO-500 5SPD,350 RamJet (polished),Jet-Hot coated Hooker Headers,Magnaflow dual exhaust,11" Ram clutch,10 bolt 370 Posi,Rock Valley fuel tank,Vette Brakes monoleaf suspension,AGR quick ratio steering,Baer 4 wheel brakes,17X7 Alloy Cragars w/245/45X17 AVS Sports in Front & 17X8 Alloys w/255/40X17's Rear.
Chris
-
12-03-2005 #2
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
most GM ball joints are the same. The pivot points are the centers of the balls in the ball joint housing. See if someone has one laying around...im sure marcus would know for sure...if all eles fails spend the 20 buck for one at Kragens.
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
Reply With Quote
