Results 1 to 3 of 3
Thread: Lower a-arm bushing removal
-
12-02-2005 #1
New to Pro-Touring
- Join Date
- Sep 2005
- Posts
- 14
Lower a-arm bushing removal
What is the best way to remove the lower a-arm inboard bushings (68 Camaro) as I have noticed it is not an easy job? Thanks, Brian
-
12-02-2005 #2
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
I use an air hammer with a chisel attachment. First I hit a couple spots around the inside of the arm then pry it out. Takes me about 45sec for each bushing.
I use to use a big hammer and a chisle. Hammer the bushing around the inside of the control arm then hit it frome the inside outwards. that took about 5 min a side.MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
12-02-2005 #3
Registered User
- Join Date
- Aug 2004
- Location
- Bedford TX
- Posts
- 634
Put a little PB blaster on there before you start either one of those and it will make it a little easier also.
Justin, 68 Camaro Update:5 speed is in and neighbors are pissed!
Reply With Quote
