Ridetech Coul over instal question

[Motoracer838]

Well, a quick trip to the homedepot actually yielded some results for once. I didn’t get them absolutely perfect, but much better than I could have with the drill alone. The angle extension only cost $13 bucks and with the channel locks I got pretty close to the angle I needed to let the flange of the hex head fully engage the bracket.

For anyone else looking to do this, a better method would be to grind a shallow taper on a centerpunch and use it to punch the holes, this would roll material in giving much more material for the self tapping screws to bite.

Joe