Results 1 to 20 of 32
Threaded View
-
01-27-2018 #11
New to Pro-Touring
- Join Date
- Jan 2018
- Location
- Peru IL
- Posts
- 24
One of the first things we did when we received the car was to remove the TCI pro touring IFS and 4Trinagulaed 4 link rear suspension along with the Moser 9" housing in order ot have them powder coated. Of ourse this mean pressing out all the bushing and prepping them to media blast. We got them back on Wednesday and this weekend worked on reinstalling the bushings and getting them ready to go back in the car when we are ready. They turned out great as you can see.
We also received the 9" 3rd member this past week and managed to get it installed in the Moser housing. We are running a Yukon Nodular housing, True Trac Posi, and Daytona billet support Yoke along with a set of Moser 31 spline axles. This rear end should handle all we can throw at it an more.
Next up, is to gte the brakes ordered and installed, and also Fabricate the rear trunk floor side panels and seem seal the entire car.
-
Reply With Quote
