Project Frankenstein

[Motoracer838]

Coming soon, round three of front suspension mods, (or maybe it's more like 2.5 ) This will be about some fine tuning. I have a new set of Moog 5664 springs that will get a half coil off The last set got a full coil in round 2) and a set of proforged 1/2" taller lower ball joints, as well as a set of Russell button head banjo bolts to take care of a clearance issue that came up with the LS brakes I did during round 1
IMG_20180503_172453676 by Joseph Martin, on Flickr
This should set the front just a small fraction of an inch higher than it landed in round 2 and give me back some suspension travel, it rode decent after lowering, but I'm greedy and want it to ride as good as it can at a given height....



Cheers Beers n Gearz, Joe

[Motoracer838]

Mission accomplished, The new parts put it right in the sweet spot, and gave me enough travel to give back the ride quality it had before I started cutting springs...
IMG_20180506_055639312 by Joseph Martin, on Flickr
IMG_20180506_055653443 by Joseph Martin, on Flickr
Persistence pays off...

Joe