Results 1 to 12 of 12
Threaded View
-
10-07-2017 #2
-Moderator/Sponsor-
- Join Date
- Apr 2001
- Location
- The City of Fountains
- Posts
- 16,120
Temperature sensors are thermistors and work through variable resistance, like a gas level gauge. The signal can't be split and each gauge is looking for a particular resistance vs. temperature curve. So you can't do what you want to do...
Originally Posted by 1967ls2
I am currently running a standalone temp sensor I mounted in the passenger side head to an auto meter gauge in the dash.
I'd like to utilize the OEM sensor that is mounted in the driver side head from the factory that the computer uses.
Has anyone done this? Would I just tap into the harness and extend the signal wire to the auto meter gauge?
Andrew1970 GTO Version 3.0
1967 Cougar build
GM High-Tech Performance feature
My YouTube Channel Please Subscribe!
Instagram @dr__efi
I deliver what EFI promises.
Remote Holley EFI tuning.
Please get in touch if I can be of service.
"You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." ~ Her
-
Reply With Quote
