1970 Mustang Mach 1 Restomod/Pro-Touring Build

[builttodrive]

I let the paint sit for a couple days and then gave the clear a good wet sand and buffing. I also started adding a few components that are easier to install now before I get the engine in place. After that I started with the suspension and steering. I went with the Ride tech level 2 coil over system both front and rear. The front is pretty straight forward. The rear has a little more involved and they have updated the rear cradle since earlier system and it uses some different mounting. One thing not mentioned in the instructions is the rear hard brake line bracket will need to be removed for the cradle to go into place properly.