Southside Machine Tall Spindles

[CSG]

I'll get that info. I do have a bump steer guage setup already and have done the setups on my road race car so I am familiar with setting them up.



Thanks,
Scott

[Rod]

Rod, do you know if these spindles have the steering arm mounting points moved for bumpsteer correction?

the steering arm is in the stock location

[Rod]

Rod, can you give us an update on the S-M tall spindles? I'm trying to decide between them and ridetech.

What car? and what else are you using with the spindle, (Steering arm, control arms, tie rods?)

[USAZR1]

What car? and what else are you using with the spindle, (Steering arm, control arms, tie rods?)

1970 A-body. A-arms? I was considering UMI adjustables or something similar but open to suggestions. Steering arms? Stock at the moment but UMI will be introducing new steering arms in a couple of months. Tie rods? What would you suggest? Springs are UMI 2" drop. Shocks? Looking at ridetech units.
Car will see 98% street use but might try an autocross at a Goodguys event.