Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5

    Threaded View

    1. #1
      Join Date
      Mar 2013
      Location
      San Jose,CA
      Posts
      250
      Country Flag: United States

      Speedo not reading correctly... vss issue?

      I installed a 98-02 fbody t56 and a ls3 with psi conversion stand alone into my 72 camaro and also running Dakota digital cluster.

      The vss goes from the stand alone to the ecm.. which has a Dakota digital module that converts the signal to the cluster.. (a lot going on I know).

      I haven't been able to calibrate the Speedo correctly since the swap it's always been off and manually won't allow me from what I believe is due to ecm taking over..

      Well today took to get dyno tuned from a good LS specialist tuner and he wasn't able to calibrate it either..

      We are both hoping that someone has had this issue?

      He mentioned that possibly the speed sensor may have a voltage difference then other model sensors? Or may be a reading difference that may need a adapter in some cases?

      Thanks for any help

      LS3 1967 Camaro RS





    Advertise on Pro-Touring.com