Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7

    Threaded View

    1. #1
      Join Date
      Jun 2015
      Location
      kent,ohio
      Posts
      128
      Country Flag: United States

      Splined sway bar question.

      I am mocking up the sway bar on my modified 4th gen camaro front suspension. I am using Keyser/Port City needle bearings and 1 1/4 49 spline straight steel arms that are 3/4" thick. My question is what is the best way to bend the arms? They will need a single bend of about 35* midway of the bar length. Total length of finished arm will be roughly 15" long and have 3 mounting hole provisions for tuning.



      Also, these arms are HEAVY at 9lbs apiece. Can aluminum arms be used on a 3300lb PT car safely?

      I want to thank Ron and all other commentators on this forum for sharing their wisdom and ideas. I have and will continue to develop a much deeper understanding of suspension dynamics from reading many of these posts.

      Dave





    Advertise on Pro-Touring.com