Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5

    Threaded View

    1. #1
      Join Date
      Dec 2004
      Location
      Crestview FL
      Posts
      276

      Going to the track

      Tomorrow the camaro will be making it's debuted at the track. I have a new 383 that is all broke in and ready for some base line testing. It has been almost 2 years since I have been able to race so I am alittle excited to say the least. The air here has been really cold for FL tonight is was in the 40's so I am hoping that the dense air here at sea level will help..



      ok here is the old combo ..355 stock heads 1.94in 1.50ex.. Small cam with slight lope Ran out of steam at 5000 ...About 9.0 comp 600 edelbrock carb rpm intake and 2400 stall and 3.55' s on slicks. It ran good for what it was and made decent power. I was putting 236hp and 280tq to the wheels... and my best time with this combo was 8.55 @ 80 in the 1/8. Yes i know 1/8 mile racing sucks but that is all we have here in redneckville.... anyway

      Here is the new combo :

      The motor is still untuned but I set the timing close and it runs like a scalded ape up to 6200.....

      383ci,10.5-1 AFR 195's ported, Comp 286HR, 4340 forged Crank & Rods, JE Pistons, RPM Airgap, Holley 750 HP carb, 350 turbo w/ shift kit, 3000 Coan. I will be running on the same set of Mickey Thompson slicks and as far as suspension goes It is just mono leafs with 90/10 shocks up front and 50/50 out back. Same as before. I have a set of cal tracks but I want to do some before and after testing before i install them..

      Ok here is my seat of the pants prediction.... 7.80's 1.76 60' ft.

      Any Predictions????





    Advertise on Pro-Touring.com