Results 1 to 6 of 6
Thread: Hydroboost question
-
11-18-2016 #1
Registered User
- Join Date
- Sep 2013
- Posts
- 38
Hydroboost question
What are you using for a firewall seal/boot for a hydroboost? I'm having trouble finding one. Thanks.
-
11-19-2016 #2
Registered User
- Join Date
- Aug 2016
- Location
- Tampa FL
- Posts
- 97
I made mine from gasket material. It does get a bit skinny at the top, but the seal is good
06-02-2017 #3
Registered User
- Join Date
- Jun 2017
- Posts
- 1
New here,where can i get the hydroboost firewall bracket.1st gen.f-body
06-04-2017 #4
Registered User
- Join Date
- Sep 2013
- Posts
- 38
I searched high and low trying to find one. Only place I could find was Tallon Hydraulics and it's a really nice piece.
06-15-2017 #5
Registered User
- Join Date
- Jun 2017
- Posts
- 36
Why don't you make one or use some 3M Urethane window weld, place a nice bead and mount the unit and clean up with some mineral spirits, stuff is messy as hell but makes great seals.
06-22-2017 #6
Registered User
- Join Date
- Sep 2002
- Location
- So. Cal
- Posts
- 1,179
I used a peace of closed cell foam pipe insulation I had laying around. 3/4" I.D. Round Armacell orArmaflex about 3/4" length doughnut. Slipped over the input shaft and sealed nicely. Home Depot has something similar but not as soft. Grainger has Armaflex
Originally Posted by beeler311
Ron DeRaad
68 Camaro RSx
Darton Sleeved LS9 - 434ci (4.155x4.00)
AFR LSX245 Heads (12:1cr)
660hp/588tq
Reply With Quote
