Results 1 to 5 of 5
Thread: OER sheetmetal
-
11-14-2005 #1
Registered User
- Join Date
- Jul 2005
- Location
- Crescent City,Ca.
- Posts
- 10
OER sheetmetal
JoshC's panels fit almost exactly like mine I am trying to install.They are wrong in exactly the same places.Called CI,Oh NO they have never had aaany problems with fit.MY ASS!
-
11-14-2005 #2
Registered User
- Join Date
- Aug 2004
- Location
- chambersburg
- Posts
- 86
ha ha oer sheetmetal
let me guess,the quarter panels i bought for my 69 conv,fit everywhere BUT in the trunk area where the seal went had a 1 1/2 gap there.with shipping they cost me 1100.00,and we cut them off to add a piece to fit.when you look you can't see anything.
11-14-2005 #3
Registered User
- Join Date
- Jul 2005
- Location
- Crescent City,Ca.
- Posts
- 10
Not mine.The1/4 fit great but the doors and fender(drivers side mostly)are BAD.
11-14-2005 #4
Registered User
- Join Date
- Aug 2004
- Location
- Caledonia, MI
- Posts
- 451
Check out Mikescustomcars.com. I talked to Mike about doing the metal work on my 69 camaro. From what he told me only one company makes door shells. He said that they drill out the spot welds and reposition the skin on all new shells they use.
Jason Mitchell
1969 Camaro @ Dutchboys
11-15-2005 #5
Banned
- Join Date
- Aug 2003
- Location
- Orlando, FL
- Posts
- 8,745
We have to strap the quarters to squeeze them at the trunk jam area. Door shells are bad, BAD! Yes josh fit looks normal, before the cutting, bead welding, hammers and pry bars come out.
Reply With Quote
