Results 1 to 14 of 14
Threaded View
-
10-19-2016 #5
Registered User
- Join Date
- Nov 2010
- Location
- Ma.
- Posts
- 583
Something like this. It is possible to do it, but it does take time. I probibly have close to 30hrs design time, another $3-400 in material ( all 4140 ) and luckily I have a friend with a CNC, otherwise it would have been a ton to machine. All said and done, I'll bet your looking at $3000 to make a set. I made mine so I could run Dodge Ram SRT10 hubs and brakes on the front (15" rotors).
-
Reply With Quote
