Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Sep 2016
      Location
      Kingman AZ
      Posts
      38
      Country Flag: United States

      1967 Camaro LS project

      I just joined this site and thought I would share my mess with anyone interested in looking.
      I picked up a well used 67 camaro a year or so back and finally started on it a couple of weeks ago. The body was pretty rough but not nearly as bad as some I've looked at on hear. I feel like I started on a newer car compared to those.I purchased an L99 out of a 2010 camaro with a 6l80 trans. It looks like installing that will be easy compared to the new camaro interior. I am still gathering information on everything else so I'll try to read as many posts on here as I can find. Ray

      Attached Images Attached Images                


    2. #2
      Join Date
      Sep 2016
      Location
      Kingman AZ
      Posts
      38
      Country Flag: United States

      Progress after two weeks

      After two weeks of work I have the new vent cowl in and welded, the right rear quarter has been replaced along with the trunk floor pan. The left quarter window on the roof line had to be sectioned because of extensive rust. I didn't feel it needed a complete roof. Several rust spots have been patched.
      Attached Images Attached Images          

    3. #3
      Join Date
      Aug 2007
      Location
      Jonesboro, Arkansas
      Posts
      2,506
      Country Flag: United States
      i've seen worse starters. My '68 has had every body panel replaced, including a complete roof and one piece floor. Looks like you've got a pretty decent start. Oh, welcome to the site, I feel like you'll enjoy it here, lots of good, knowledgable, people here that don't mind lending a helpful hand if your willing to listen. I'm telling ya', i'm sure that whatever you have in mind for your car has probably been done by someone here.

      Carl Wilson
      1968 Camaro - T-56 6 speed - 383 Stroker, 2014 Mustang GT seats. FiTech EFI, Tanks Inc. Tank with Deutschwerks fuel pump.

    4. #4
      Join Date
      Sep 2016
      Location
      Kingman AZ
      Posts
      38
      Country Flag: United States
      Carl thanks for the pep talk. I'm sure I'll need some help on this. While the actual work is pretty easy the technical end of what works with what is always the big question.
      Thanks Ray




    Advertise on Pro-Touring.com