American Racing Torq Thurst II 's

[TomsResto]

All four are 17"s but wider rears (fit with DSE mini tubs with plenty of clearance, may fit non mini tub but I can't say for certain)

All the details are in the following Craig's List post as I'd prefer to sell locally and not deal with shipping, but if someone will work with me on helping cover the cost to ship then I'd rather work with someone here on the forum than the people of Craigslist.

http://cedarrapids.craigslist.org/wto/5756125411.html


Reason for Selling: I'm going with a DSE full front subframe that required me to step up to 18" on the front to clear new brakes, and so then I stepped up to 19" on the rears

PM or email or text:
[email protected]
319.270.4140

[TomsResto]

I should say also that because these front and rears are of different sizes if I need to split them up I can/will ... but figured I'd offer up first as a complete setup if someone's build/configuration can utilize the four as they are.

[67z28]

To bad your not closer. I am looking for a reasonably priced set of 17" wheel for a 55 project I'm working on. Shipping would be high coming to Florida.

Good luck with the sale

[TomsResto]

To bad your not closer. I am looking for a reasonably priced set of 17" wheel for a 55 project I'm working on. Shipping would be high coming to Florida.

Good luck with the sale

I'll send you a PM with my email, I shipped some subframe connectors to FL here recently ... maybe cost prohibitive but we could try a quick check if we do a business to business address (surcharges to residential addresses, but I can ship from my business address with daily scheduled pickups)

[Joe87MonteSS]

I would be interested in the rear wheels, but I don't know how "your method" differs from everyone elses. If they are 17x9.5 with 5.5 BS, then I need them.

[TomsResto]

I would be interested in the rear wheels, but I don't know how "your method" differs from everyone elses. If they are 17x9.5 with 5.5 BS, then I need them.

Shoot me a PM with your contact info and we'll talk, I can place tape measure on things and snap pictures to text/email to you whatever ...

The other thing is shipping, if you are in TN and don't have plans to be in Iowa

I priced shipping to Florida for another fellow here on the forum and I'm being quoted a little over $200 per set (2 fronts or 2 rears, over $400 for all four)

Thanks,
Tom

[silvermonte]

I totally wish i had some cash on me and I would zip over to your place and look at these.

[TomsResto]

I totally wish i had some cash on me and I would zip over to your place and look at these.

Send me a PM with your contact info

Where are you located?

[TomsResto]

So another fellow forum member came over (local area) and he couldn't get the rears to fit in his S10 (too close to frame rail)

We gave them another measure and they are looking like they are 6.5" from hub mounting gave to outer most portion of lip.

I updated the craigslist post with that updated information just now.

We also noticed the rear falken tires are 360 tread wear so figured I'd let those on the forum here know that detail.

He is possibly interested in the fronts though, as is another guy so shoot me your offers on the rears (oreferrably with the tires but if enough time passes I may separate rubber from wheels)

[TomsResto]

SOLD (all four wheels/tires) ... thank you