Project DNA

[Screamin Performance]

This is a project we are fixing. It was taken to another shop years ago and we are finally getting around to fixing the inferior work by this other shop code name PC. This was a $140,000 build gone wrong. We now have the honor of fixing it for the customer !

[Screamin Performance]

[Screamin Performance]

[Screamin Performance]

[Screamin Performance]

Tear down in progress !

[Screamin Performance]

The car was a rusty mess. Also someone destroyed a lot of the car with an air chisel. The door jams had 3/4 of an inch of bondo etc. We are just going to replace about everything.

[Screamin Performance]

Here is all we were able to save from the original car ! This is why I dubbed it project DNA !

[Screamin Performance]

I will post more pictures later. thanks for looking !

Brian

[JayinMI]

Wow. That kind of work is what worries me about project cars. It's also pretty common from what I've seen. I work on quite a few classic cars and quite typically, if you can see it it looks OK, but under dash, behind door panels, trunk floors and inside the quarter panels are usually untouched. Glad to see you guys doing it right.

Jay

[Protour_Pinto]

I can see wanting to save the VIN but wouldn't it make more sense to start with a new body?

[Motown 454]

These stories are heart braking. Glad your going to take care of it for him.

[Screamin Performance]

Here is where we are currently with the project.

[Bugzilla]

Wow.... I didn't think that bad of work was even possible. That is just sad. Glad you guys are doing it the right way.

[Hooker68]

Excellent work done by an Honest shop if they were all done like that they could be handed the down for many generations it's a real shame the way some shops take advantage with exorbitant prices and very shoddy work. Great job

[Motown 454]

Brian, If he saw that other convertable you did he's got to be excited to know what he'll get back. Subscribed.

[Cryptonomad]

git r done! Nice work Brian!

[MuscleRodz]

This is a project we are fixing. It was taken to another shop years ago and we are finally getting around to fixing the inferior work by this other shop code name PC. This was a $140,000 build gone wrong. We now have the honor of fixing it for the customer !

Only the old timers here would know who you are referring to.

[Hard2core]

Only the old timers here would know who you are referring to.

post 39 http://www.camaros.net/forums/56-pro...-advice-3.html

[raustinss]

problem child ?
politically correct ?
pizza cutter ?
Am i close ?

looks like Frank had Hellen Keller doing some welding work , what an abortion . I agree why not just rebody the car and swap the vin

[mildcustom2]

I have to ask. Why bother taking it so far? The cost involved would be outrageous versus starting with something new or in better condition.