Results 1 to 6 of 6
Thread: Core Support F body
-
08-04-2016 #1
Registered User
- Join Date
- Feb 2015
- Location
- Camp Lejeune, NC
- Posts
- 65
Core Support F body
My radiator core support is looking pretty sad. I want to replace it whIle my engine is out and have some questions. The car is a 1968 camaro.
1. Can I leave the fenders in place while I replace it?
2. What brand would you guys recommend? I like the price of the one at npd, but worry I will get what I pay for.
Thanks,
-Joe
-
08-04-2016 #2
Registered User
- Join Date
- Jul 2016
- Posts
- 348
Go with AMD. Fenders have to be separated a little to lift out core support, tilt support to engine side as much as possible. Usually the fenders do not have to be removed.
08-04-2016 #3
Registered User
- Join Date
- Feb 2015
- Location
- Camp Lejeune, NC
- Posts
- 65
Thanks. Can it be pulled out toward the firewall or does it have to come out through the front?
08-04-2016 #4
Registered User
- Join Date
- Dec 2010
- Location
- Fredericksburg, VA.
- Posts
- 3,164
I second the AMD core support. Once you get in there you will see how the core support comes out. It is really no big deal. I replaced my support in about three hours. I purchased my support and then waited to install it until I needed to remove the radiator for other reasons.
08-04-2016 #5
Registered User
- Join Date
- Aug 2007
- Location
- Jonesboro, Arkansas
- Posts
- 2,506
What they said...
Carl Wilson
1968 Camaro - T-56 6 speed - 383 Stroker, 2014 Mustang GT seats. FiTech EFI, Tanks Inc. Tank with Deutschwerks fuel pump.
08-04-2016 #6
Registered User
- Join Date
- Feb 2015
- Location
- Camp Lejeune, NC
- Posts
- 65
My radiator and engine are about to go back in. That's why I figured I'd do it now.
Reply With Quote
