Staggered '98-'02 F-Body Rear Brake Setup for '68-'81

[F-Body International]

Doing yet another change on my car so I'm passing off a good deal and sorted setup. This is a pair of L (driver side) '98-'02 F-Body brakes set up to mount in early GM F-Body '68-'81 orientation. Having it installed in this manner lets you keep the shock absorbers in stock position.



-Kore3 braided stainless flex line kit (Brand New) for front calipers, rear caliper and axle drop.
-BRP Hot Rods adaptor spacers (Brand New)
-Two L brakes. I have modified one of the backing plates so both parking brake levers pull forward like early cars.
-Original GM pads and rotors from a <20k mile '99 Trans Am that got Brembo brakes swapped.
-4th gen parking brake cable unmodified.
-CPP 15/16" bore C3 Corvette style master cylinder

$400

Below you can see how these brakes are in staggered orientation and also fill up a 17" wheel fairly well. I wouldn't suggest these if running 16" wheels or smaller.





Kore3 brake line kit for front and rear late model GM brakes...

[drhdrock]

$ sent

[camarodude87]

Dammit!

[F-Body International]

Sold

[drhdrock]

Got em... couldn't find the brake lines at first but they were in there! Thanks