Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Aug 2004
      Location
      NJ
      Posts
      1,295
      Country Flag: United States

      Shaving Drip rails

      Hey everyone, I have a 72 chevelle and was thinking of shaving the drip rails. Has anyone done this? Could you tell me whats involved, besides a little welding. Anything I should pay close attention too?
      Thanks in advance,
      John



    2. #2
      Join Date
      Jun 2002
      Location
      Long Island, NY
      Posts
      11,320
      Country Flag: United States

    3. #3
      Join Date
      Aug 2004
      Location
      NJ
      Posts
      1,295
      Country Flag: United States
      thanks ralph-

      So what I gather, The best way to do this is to do small sections at at time, maybe four inches or so, and tack weld it together, until you have the whole side done, Then go back and just tack the whole thing up, working from end to end so not to distort the metal? Sound right?

      John

    4. #4
      Join Date
      Jun 2001
      Location
      Orlando, FL
      Posts
      10,604
      Country Flag: United States
      John,

      That's how I did it. It will take you a weekend or so. Watch out during grinding that you don't generate too much heat, and keep an eye out for the original lead in the sail to roof seam.

      jp
      ​John Parsons

      UnRivaled Rides -- Modern upgrades for your ride.

      UnRivaled Rides recent project -- LS9-powered 69 Camaro

    5. #5
      Join Date
      Jan 2006
      Posts
      3
      i shaved them off of a 70 charger and just took my time lil spotwelds till i got the whole thing welded up then grind and filed the biggest thing make sure you get the line straight before priming use your eyes to look down the roof panel




    Advertise on Pro-Touring.com