Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 5 of 7 FirstFirst 1 2 3 4 5 6 7 LastLast
    Results 81 to 100 of 136

    Thread: Carbon Fiber

    Hybrid View

    1. #1
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by TheJDMan View Post
      Isn't that a Lancair?
      That is Lancair. I'm not doing my parts through them though.



    2. #2
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      Hoods look good ...guess the plane does to lol... so what would you sell a hood for one of those corvettes for . Comparison that's all
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    3. #3
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by raustinss View Post
      Hoods look good ...guess the plane does to lol... so what would you sell a hood for one of those corvettes for . Comparison that's all
      Haven't sold one yet. Those were my first attempts. I made those in my garage via resin infusion, but I didn't have an oven to post cure with. I was trying to figure out the best way to get my parts baked in an oven or autoclave when I started talking about this group that wants to help me make the parts. They have the autoclave and skills with prepreg as well as high end mold making to get it all done. Keeps my overhead down, and my garage clean, lol.

    4. #4
      Join Date
      Sep 2010
      Location
      corona,ca.
      Posts
      1,132
      Country Flag: United States
      Gerry,nice parts!
      Are those fiberglass molds you made off the oem part?
      Have you looked into a flexible poly mold material? BJB Enterprises Inc is one co. We use for our molds.
      You can make then in different durometers and they last for years and can really take a beating.
      Fiberlay is another co.
      Phil.
      72 chevelle.

    5. #5
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by chevelletiger View Post
      Gerry,nice parts!
      Are those fiberglass molds you made off the oem part?
      Have you looked into a flexible poly mold material? BJB Enterprises Inc is one co. We use for our molds.
      You can make then in different durometers and they last for years and can really take a beating.
      Fiberlay is another co.
      Phil.
      Thank you. Yes those were fiberglass molds. Those were the first molds I ever made in fact, lol. The group helping me will be making all of the molds. They can make high production molds which saves me the learning curve of doing it myself.

    6. #6
      Join Date
      May 2016
      Posts
      57
      I thought I saw an all CF 2nd gen at Sema several years back. Nobody's selling those parts?

    7. #7
      Join Date
      May 2016
      Posts
      57
      I'll be meeting with my guys building the parts for me in the next couple weeks so I'm hoping to have more information on pricing after then.

    8. #8
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      I look forward to hearing back...cheers
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    9. #9
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by raustinss View Post
      I look forward to hearing back...cheers


    10. #10
      Join Date
      May 2016
      Posts
      57
      So far I haven't been able to get as much information as I would have liked. The main person I need to work with was gone for some of the time and sick while he's been here... What we believe as of right now is a rough estimate that a complete monocoque body could be sold somewhere in the $50k range. Take in mind that this is a complete unit and not needing work besides possible minor modifications and body work for paint. Something like the Ring Bros car will need a lot more work done to finish out the car and would cost a lot more in the end. By making the unibody in all carbon, the estimated weight of it all would be around 100 lbs vs 600+ lbs when in metal.

    11. #11
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      the problem there after is going to be registration and seems to be more of a U.S. problem then in canada ....as per some previous threads reg. re-vin # new sheet metal shells
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    12. #12
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by raustinss View Post
      the problem there after is going to be registration and seems to be more of a U.S. problem then in canada ....as per some previous threads reg. re-vin # new sheet metal shells
      Yes, I was wondering about that as well. Shouldn't be a problem if someone tries to get a vin as a kit car. If someone is trying to register it as a genuine 69 Camaro, that may be tough. Probably depends on the state.

    13. #13
      Join Date
      Dec 2013
      Posts
      179
      Country Flag: United States
      at least in my state: Because the body is a reproduction of the original; the car can be registered as that model and model year. I am not entirely sure if you make up the vin number or if one is issued or what.

    14. #14
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      So at 50 k ....possibly having safety and some registration issues ....would it not be better off going the way of something like everything from Anvil (in the case of a camaro ) and be a little heavier ?
      not by much thou if you watch the Jay Leno ring brothers interview they state the weight of the Mustang with carbon skin ....which is my suggestion if your a ford guy . That way you maintain registration, factory ford or gm engineering, safety and , probably keep some cash in your pocket ?
      With above said cases you know all interior components will still fit as they should, not have to run extra wires for grounds . I'm sure there is some other things I can't recall right now
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    15. #15
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by raustinss View Post
      So at 50 k ....possibly having safety and some registration issues ....would it not be better off going the way of something like everything from Anvil (in the case of a camaro ) and be a little heavier ?
      not by much thou if you watch the Jay Leno ring brothers interview they state the weight of the Mustang with carbon skin ....which is my suggestion if your a ford guy . That way you maintain registration, factory ford or gm engineering, safety and , probably keep some cash in your pocket ?
      With above said cases you know all interior components will still fit as they should, not have to run extra wires for grounds . I'm sure there is some other things I can't recall right now
      Why do you think that safety would suffer, or that we would make it as light as possible even to spite strength? I asked this question to the gentleman that will be making my parts and they assured me that the car would be MUCH safer and stronger in full carbon. He referred me to an airplane accident that happened once where the plane hit the ground at 140mph. The passengers were killed by the sheer force of the hit, but the cockpit appeared to be structurally in tact. As if you could put on a new set of wings and fly it away. That means that the car should be able to withstand a lot and you shouldn't have the concern of being crushed in the car.

      Covering the metal frame with outer skins doesn't make a whole lot of sense to me because what's the point? There isn't a ton of weight in just the metal skins. You won't be saving much in weight. IMO you'd be better off just doing the car in all metal and skinning it if you are going for the carbon look.

      Now if registration is an issue and someone wants to have a true '69, then this product probably isn't for you. I wouldn't think anyone modifying their car this much is going to be concerned about it being a true 69 vs it still looking like the real thing.

      Edit: Re reading this later it comes across to me as if my first sentence is somewhat attacking you and I want to make it clear that I'm not. I'm just asking the question.

    16. #16
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      not taking it as a n attack , i have thick skin lol .... the safety issue is that carbon splinters and sprays those fibers . Not too mention crush zones , no matter how good or bad they were designed in the 60-70's . i know that metal skins dont weight that much but i urge you the find the video of leno driving one of ring brothers mustangs ... they say the weight of the body ... it is quite light just found the video on youtube ...they guess the stock body to be around 7-800 lbs and they claim the carbon to be 180 ......jay lenos garage its a 30 min video ...weights mentioned in the first 3 mins

      as for registration it wouldn't be so much a issue here as it seems Canada is way more relaxed than the states with what defines a car ....( I.E re-vinning) . it would help with the insurance issue and on that note if there was a collision or theft of said car. there would be a difference with values and parts availability. even thou we all know the parts would be the same . what i trying to say is it would be easier for an insurance company to screw you if your car had a "kit" car title vs a 1969 camaro title for example .
      hiding under the name of a kit car requires "more" work for a insurance company to find parts yet when its a "production car its easy to valve the car and or the sum of its parts
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    17. #17
      Join Date
      May 2016
      Posts
      57
      I have no doubt that all of their carbon weights about 180 lbs. The car as a whole weights roughly 3,000 lbs. They have a lot of extra metal in framework that adds a ton of weight that we wouldn't need in a monocoque design. I saw a raw Ringbrothers body and the frame that went with it. Like I've said in prior posts, there is basically no structure to their carbon parts. At least not the unibody section.

      Steel will crumple and not splinter true, but steel will also fail after a certain amount of force, just like Carbon will. Carbon will just be able to hold it's strength to a much higher force than steel will.

      Gotta remember, formula one cars have an all carbon cockpit. If it wasn't safe/safer, they wouldn't be using it.

    18. #18
      Join Date
      Dec 2010
      Location
      Fredericksburg, VA.
      Posts
      3,164
      Country Flag: United States
      I don't see titling as an issue since you can build any number of kit cars these days and get the finished project registered in any state in the US as near as I can tell. But, I am curious about things like the structural strength/rigidity of a CF body. By that I just mean some racing competitions require roll bars or cages to be installed for a car to be legal. In the typical steel body subframe connectors and roll bars/cages add strength and rigidity but how would a roll bar/cage work in a CF body? I'm also curious how hard CF is to modify? I'm thinking of body mods like say installing mini-tubs, just as an example, and I'm also trying to envision how one would go about installing any of the popular PT coilover based rear suspensions in a CF shell.
      Steve Hayes
      "Dust Off"
      68 Camaro

      Support the RPM Act
      https://www.sema.org/rpm-faq.

    19. #19
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by TheJDMan View Post
      I don't see titling as an issue since you can build any number of kit cars these days and get the finished project registered in any state in the US as near as I can tell. But, I am curious about things like the structural strength/rigidity of a CF body. By that I just mean some racing competitions require roll bars or cages to be installed for a car to be legal. In the typical steel body subframe connectors and roll bars/cages add strength and rigidity but how would a roll bar/cage work in a CF body? I'm also curious how hard CF is to modify? I'm thinking of body mods like say installing mini-tubs, just as an example, and I'm also trying to envision how one would go about installing any of the popular PT coilover based rear suspensions in a CF shell.
      One of the design features I would like to implement into the molds would be a modular design. Meaning we would design the basic floor pan and have inserts for what ever change someone wants to make. Mini tubs, changed tunnel, etc, those things would be fairly easy to do in the part making process. Any other major modifications one would want to do to the external body could be done for an little extra cost. I know most wouldn't need to but it would be something we offer anyway.

      As stated above, you can make a CF body extremely strong. In the airplane example I gave earlier, basically two cars going 70 mph could hit head on and you would not break the cabin.

      Here's an example video of how much stronger CF can be than steel.

      https://www.youtube.com/watch?v=hjErH4_1fks

    20. #20
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      Yes but you still want crush zones .... otherwise it's a human which must absorb the impact energy, race cars somewhat combat this with race seats, harnesses and Hans devices ...
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    Page 5 of 7 FirstFirst 1 2 3 4 5 6 7 LastLast



    Advertise on Pro-Touring.com