Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 2 of 7 FirstFirst 1 2 3 4 5 6 7 LastLast
    Results 21 to 40 of 136

    Thread: Carbon Fiber

    Hybrid View

    1. #1
      Join Date
      Dec 2013
      Posts
      179
      Country Flag: United States
      Quote Originally Posted by gabbett1 View Post
      Would it need to 100% mimic the existing metalwork? As long as it fits and everything bolts in, I'm sure there is a decent amount of smoothing that could be done. Plus having the floor attached would be a huge boost to structural strength.

      My original plan was to have several different "floor" molds based on what kind of build someone wants to do that can fit into a one piece design so it would be a somewhat modular mold setup.

      Thoughts?
      Seems like if one is going to start cutting up the interior structure; a quintessentially Camaro 2+2 passenger cell would be the next logical step that would really bear fruit in terms of performance for money. Especially when we are talking about a unibody car.



      Right now for a unibody car, the next real steps to me are: composite front sub-frames, composite suspension pieces, etc.


    2. #2
      Join Date
      Sep 2010
      Location
      corona,ca.
      Posts
      1,132
      Country Flag: United States
      Quote Originally Posted by HellPhish89 View Post
      Carbon fiber manufacturing is expensive. Car companies have done crazy things like resorting to weaving the carbon thread into the parts they want. Chevy, Ford, Mercedes, and others have had certain alliances at points in time to try to figure out a less expensive way to manufacture carbon/composite parts.

      Of course there is also the mold making.. which is also expensive.

      IE:


      Lay ups can also be quite complicated:



      From there.. most higher end manufacturers are going to be using pre-preg carbon and will 'cook' the parts in an autoclave.
      Yeah...sorry my friend but those kits and prices for mold making material from companys on youtube or the web are very much priced(over priced)for the general public.
      One co. Smooth on wants about $20.00 a pound for there mold making material,
      The shop i work at that does molds in euro and silicone can get it for $7.00 a pound and its just an A+B mix and no min. Order.
      Im not trying to start a fight here but unless you work in this industry or have played with any of the mat. Please dont comment.
      In the past,like the op i got slammed on other sites for making my own suspension parts with the comments of "yeah you need special machines and welders design and bla bla bla)from guys who cant even fkin weld or design s#&t for there life,while i can tig,mig,mill,turn parts out of raw steel and aluminum. While making bad ass parts for alot less then buying,as a matter of fact im in the process of making a lower front chassis brace for a member here.metal cost me about $35.00 and its about 95.00 lower in cost then sc&c
      Alot of times guys bash other members because they lack skill or dont have the ballz to take a shot at making something on there own.
      What you make a wrong bend and its off?so what...cut that bitch off rebend,weld,done.
      What happend to hot rodding? Is it just a bunch of check writing turtle neck wearing *****s that cant think or wrench for themselfs?

      Not saying this to any one person btw,but i just get pissed when guys sitting on a keyboard want to act like there experts because they see a video or read about something done and are now taking s#&t! Why dont members try to bring a guy up on an idea and be positive,unless you know the guy or what his skill set is shut the F up!
      Theres alot of talented guys that are on this great site.
      72 chevelle.

    3. #3
      Join Date
      Jul 2015
      Posts
      101
      Country Flag: United States
      Quote Originally Posted by chevelletiger View Post
      yeah...sorry my friend but those kits and prices for mold making material from companys on youtube or the web are very much priced(over priced)for the general public.
      One co. Smooth on wants about $20.00 a pound for there mold making material,
      the shop i work at that does molds in euro and silicone can get it for $7.00 a pound and its just an a+b mix and no min. Order.
      Im not trying to start a fight here but unless you work in this industry or have played with any of the mat. Please dont comment.
      In the past,like the op i got slammed on other sites for making my own suspension parts with the comments of "yeah you need special machines and welders design and bla bla bla)from guys who cant even fkin weld or design s#&t for there life,while i can tig,mig,mill,turn parts out of raw steel and aluminum. While making bad ass parts for alot less then buying,as a matter of fact im in the process of making a lower front chassis brace for a member here.metal cost me about $35.00 and its about 95.00 lower in cost then sc&c
      alot of times guys bash other members because they lack skill or dont have the ballz to take a shot at making something on there own.
      What you make a wrong bend and its off?so what...cut that bitch off rebend,weld,done.
      What happend to hot rodding? Is it just a bunch of check writing turtle neck wearing *****s that cant think or wrench for themselfs?

      Not saying this to any one person btw,but i just get pissed when guys sitting on a keyboard want to act like there experts because they see a video or read about something done and are now taking s#&t! Why dont members try to bring a guy up on an idea and be positive,unless you know the guy or what his skill set is shut the f up!
      Theres alot of talented guys that are on this great site.

      x1000

    4. #4
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      Quote Originally Posted by chevelletiger View Post
      Yeah...sorry my friend but those kits and prices for mold making material from companys on youtube or the web are very much priced(over priced)for the general public.
      One co. Smooth on wants about $20.00 a pound for there mold making material,
      The shop i work at that does molds in euro and silicone can get it for $7.00 a pound and its just an A+B mix and no min. Order.
      Im not trying to start a fight here but unless you work in this industry or have played with any of the mat. Please dont comment.
      In the past,like the op i got slammed on other sites for making my own suspension parts with the comments of "yeah you need special machines and welders design and bla bla bla)from guys who cant even fkin weld or design s#&t for there life,while i can tig,mig,mill,turn parts out of raw steel and aluminum. While making bad ass parts for alot less then buying,as a matter of fact im in the process of making a lower front chassis brace for a member here.metal cost me about $35.00 and its about 95.00 lower in cost then sc&c
      Alot of times guys bash other members because they lack skill or dont have the ballz to take a shot at making something on there own.
      What you make a wrong bend and its off?so what...cut that bitch off rebend,weld,done.
      What happend to hot rodding? Is it just a bunch of check writing turtle neck wearing *****s that cant think or wrench for themselfs?

      Not saying this to any one person btw,but i just get pissed when guys sitting on a keyboard want to act like there experts because they see a video or read about something done and are now taking s#&t! Why dont members try to bring a guy up on an idea and be positive,unless you know the guy or what his skill set is shut the F up!
      Theres alot of talented guys that are on this great site.
      Agreed VERY talented people . As a fabricator I get why some things can be a Lil daunting . As someone who has been blessed with common sense I feel that there is a bunch of people who also consider that if they screw up they could kill themselves, family ,friends or a stranger. Not everyone has had the proper training to understand forces, strength material selection etc . This is where sometimes it might just be or is better to be one of those " check writing ****s" .Letting someone else who may have in house engineering i.e. DSE ,ridetech etc design the parts for you is safer and better piece of mind
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    5. #5
      Join Date
      Jul 2015
      Posts
      101
      Country Flag: United States
      Quote Originally Posted by raustinss View Post
      Agreed VERY talented people . As a fabricator I get why some things can be a Lil daunting . As someone who has been blessed with common sense I feel that there is a bunch of people who also consider that if they screw up they could kill themselves, family ,friends or a stranger. Not everyone has had the proper training to understand forces, strength material selection etc . This is where sometimes it might just be or is better to be one of those " check writing ****s" .Letting someone else who may have in house engineering i.e. DSE ,ridetech etc design the parts for you is safer and better piece of mind
      I think you would be shocked at how little actual engineering is done on most of the parts in this sport.



      Quote Originally Posted by gabbett1 View Post
      What's the best way for hosting/posting images here?
      as for adding a picture from your computer:

      click on "go advanced" next to "post quick reply"

      Then click manage attachments

      It will pop up another window which allows you to upload pictures etc

    6. #6
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      [QUOTE=krom;1190426]I think you would be shocked at how little actual engineering is done on most of the parts in this sport.

      Lol please tell me you're joking .... The amount of engineering is nuts , spc a arms? AFX spindles.... Damn near anything DSE or ride tech makes, essentially any form or cad drawings is engineered... what about wheel manufacturers ? ... agree that not EVERYTHING is engineered but there is quite a lot that is
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    7. #7
      Join Date
      Dec 2013
      Posts
      179
      Country Flag: United States
      Quote Originally Posted by chevelletiger View Post
      Yeah...sorry my friend but those kits and prices for mold making material from companys on youtube or the web are very much priced(over priced)for the general public.
      One co. Smooth on wants about $20.00 a pound for there mold making material,
      The shop i work at that does molds in euro and silicone can get it for $7.00 a pound and its just an A+B mix and no min. Order.
      Im not trying to start a fight here but unless you work in this industry or have played with any of the mat. Please dont comment.
      In the past,like the op i got slammed on other sites for making my own suspension parts with the comments of "yeah you need special machines and welders design and bla bla bla)from guys who cant even fkin weld or design s#&t for there life,while i can tig,mig,mill,turn parts out of raw steel and aluminum. While making bad ass parts for alot less then buying,as a matter of fact im in the process of making a lower front chassis brace for a member here.metal cost me about $35.00 and its about 95.00 lower in cost then sc&c
      Alot of times guys bash other members because they lack skill or dont have the ballz to take a shot at making something on there own.
      What you make a wrong bend and its off?so what...cut that bitch off rebend,weld,done.
      What happend to hot rodding? Is it just a bunch of check writing turtle neck wearing *****s that cant think or wrench for themselfs?

      Not saying this to any one person btw,but i just get pissed when guys sitting on a keyboard want to act like there experts because they see a video or read about something done and are now taking s#&t! Why dont members try to bring a guy up on an idea and be positive,unless you know the guy or what his skill set is shut the F up!
      Theres alot of talented guys that are on this great site.
      Holy christ the videos were used as an example. Not sure if you were drunk when you came up with that rant but yes, autoclaves are a pretty big part of high end cf construction and especially for stuff that is load bearing.

    8. #8
      Join Date
      Sep 2010
      Location
      corona,ca.
      Posts
      1,132
      Country Flag: United States
      No hellphish89 I was not drunk,I really don't drink unless I'm in Vegas with my wife and friends!
      And I agree with you about there being a small part of engineering in this "hobby" let's remember we think these are race cars were building but there really just toys for adults.

      Ryan your from a fabricating back ground,me?machining and design back ground.
      Actually from what I here one person who is listed as an engineer at ride tech really never got his degree in that field, it was English. It doesn't mean he understand the math and principles of engineering.
      As for there being nuts of engineering on aftermarkets parts,there's some but not nasa engineering like your claiming.seems your not confident in you fabrication skills.i am.
      72 chevelle.

    9. #9
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      Quote Originally Posted by chevelletiger View Post
      No hellphish89 I was not drunk,I really don't drink unless I'm in Vegas with my wife and friends!
      And I agree with you about there being a small part of engineering in this "hobby" let's remember we think these are race cars were building but there really just toys for adults.

      Ryan your from a fabricating back ground,me?machining and design back ground.
      Actually from what I here one person who is listed as an engineer at ride tech really never got his degree in that field, it was English. It doesn't mean he understand the math and principles of engineering.
      As for there being nuts of engineering on aftermarkets parts,there's some but not nasa engineering like your claiming.seems your not confident in you fabrication skills.i am.
      Dude first of all where the sam hell did I mention anything about bass engineering and I'm am more than beyond confident in my fab skills ...stop being ignorant I have the highest level training in Canada and graduated with honors ....I fab lots of stuff for Toyota on a regular basis being as two plants are within a short drive of our shop ....I said SOME PEOPLE MAY NOT WANT TO FAB SOMETHING DUE TO PIECE OF MIND ....
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    10. #10
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      wow ...so you wait until now to tell the class that you can,will and do make carbon parts . i know its a lil rude then but ...put up or shut up . what i mean is then do it your self . Helen Keller could tell that the camaro is the right car to do .

      as for my carbon parts ....anvil parts
      hood 2499$
      trunk 1750 $
      vent screen 135$

      ultra-carbon
      inner fenders $1200

      sub total 5584$
      custom fenders
      cost of new fenders to use for molds 2@310$ = 620
      cost of new fender extensions 2@ 42 = 84
      cost of bumper filler panel 70$

      total is now 6358
      mold those parts ...produce necessary pieces ...ship them TO CANADA ...PAID FOR IN US DOLLARS...fit to the car ...prime..paint and you think it would be too much to pay 10,000 ? you sir are out to lunch

      the parts already produced by anvil and ultra carbon are closing in on 6000 with out taxes or shipping or duty let alone an exchange rate of 1.31. so 1 us dollar is 1.31 Canadian . simple math means 5584 x1.31 =7315.04 canadian ... going back to the custom parts JUST TO PURCHASE THEM IN SHEETMETAL 6358$ x 1.31 = 8328.98$

      now going to just my fenders i told you to purchase make and ship how much id be paying .... again my parts closing in on 10,000 is not going to unheard of nor far off what im guessing my math already has it at almost 12,000 canadian which is a touch of 9000 us...

      no i wont be getting dividends off the molds being made this is an agreement between himself and myself and the company he owns , he is giving me a heavy discount on making the mold in the process in lew of paying me money . plus the same deal applies for all future parts between himself and myself .

      I am offically done with this conversation as it is gone from informative conversation to running in circles, i wish you the best in producing your own carbon car being as you say you can , when your thinking about making your own car ask yourself .... how much will reinforcing plates cost , trapped nuts for bolts parts on , post mold machining, legal registration ..I.E carbon splinters when it breaks hence another reason for just skinning a car .

      and finally AGAIN POST A PRICE LIKE NUMBERS AS TO WHAT YOU SEEM TO THINK YOU CAN OR SHOULD PAY TO DO THIS
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    11. #11
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by raustinss View Post
      wow ...so you wait until now to tell the class that you can,will and do make carbon parts . i know its a lil rude then but ...put up or shut up . what i mean is then do it your self . Helen Keller could tell that the camaro is the right car to do .

      as for my carbon parts ....anvil parts
      hood 2499$
      trunk 1750 $
      vent screen 135$

      ultra-carbon
      inner fenders $1200

      sub total 5584$
      custom fenders
      cost of new fenders to use for molds 2@310$ = 620
      cost of new fender extensions 2@ 42 = 84
      cost of bumper filler panel 70$

      total is now 6358
      mold those parts ...produce necessary pieces ...ship them TO CANADA ...PAID FOR IN US DOLLARS...fit to the car ...prime..paint and you think it would be too much to pay 10,000 ? you sir are out to lunch

      the parts already produced by anvil and ultra carbon are closing in on 6000 with out taxes or shipping or duty let alone an exchange rate of 1.31. so 1 us dollar is 1.31 Canadian . simple math means 5584 x1.31 =7315.04 canadian ... going back to the custom parts JUST TO PURCHASE THEM IN SHEETMETAL 6358$ x 1.31 = 8328.98$

      now going to just my fenders i told you to purchase make and ship how much id be paying .... again my parts closing in on 10,000 is not going to unheard of nor far off what im guessing my math already has it at almost 12,000 canadian which is a touch of 9000 us...

      no i wont be getting dividends off the molds being made this is an agreement between himself and myself and the company he owns , he is giving me a heavy discount on making the mold in the process in lew of paying me money . plus the same deal applies for all future parts between himself and myself .

      I am offically done with this conversation as it is gone from informative conversation to running in circles, i wish you the best in producing your own carbon car being as you say you can , when your thinking about making your own car ask yourself .... how much will reinforcing plates cost , trapped nuts for bolts parts on , post mold machining, legal registration ..I.E carbon splinters when it breaks hence another reason for just skinning a car .

      and finally AGAIN POST A PRICE LIKE NUMBERS AS TO WHAT YOU SEEM TO THINK YOU CAN OR SHOULD PAY TO DO THIS
      No I told you very early on that I had experience with carbon fiber. My intent here wasn't to necessarily say I was going to do it yet anyway. I just wanted to have a conversation about it.

      In regards to your parts. I wasn't trying to offend you. Also, I didn't realize you were saying $10k for everything, meaning shipping, body work, primer, paint etc. I thought you were referring to just the parts. I think you need to take a breath because you are getting very worked up over nothing here. I am just trying to have a conversation, but you seem to think you have all the answers already. If you do, then please by all means show me the evidence (of someone trying a full body). I would love to be proven wrong. Otherwise, I refuse to just take someone's word for it. Call it my stubbornness, which I know is a fault of mine, lol.

      As far as numbers, we are still working on that. I know what I can make a hood for, but that's not the topic of our conversation. Plus, I don't want to get into issues with rules of the website. I was simply here to gauge interest and it quickly escalated into, you can't do it so don't try because nobody else has done it yet...

    12. #12
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      you magically keep roping me in...... your exact wording was "eh... ive dealt with a bit of carbon fiber ..." no where in there does it say ive made parts and can make parts . also i never said 10,000 including paint and such ...thats a plus paint and such
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    13. #13
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by raustinss View Post
      you magically keep roping me in...... your exact wording was "eh... ive dealt with a bit of carbon fiber ..." no where in there does it say ive made parts and can make parts . also i never said 10,000 including paint and such ...thats a plus paint and such
      Yes, that was my fault and I apologize. I should have read what you were saying the costs were more carefully.

      Like I was saying, I wasn't trying to get into the idea that I was going to look into doing it. I just wanted to get an idea of how many people here would even have interest. There are issues that need to be overcome, as you have stated a few in your last post. I just wonder where the price break is at where you would get lots of interest vs none...

    14. #14
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      ok then you should have started with .....looking at molding a carbon car prices are going to be...... if there are x many ordered then the price is ..... these will be made with ..... these will be produced by.... and myself

      you also still havent posted what your price is and how cheap it is nor have you said how you got a complete front anvil clip for less then 10

      nor have you said what exactly you made in the airplane industry nor posted any pictures which quite possibly add to someone being interested in a unicorn carbon car
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    15. #15
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by raustinss View Post
      ok then you should have started with .....looking at molding a carbon car prices are going to be...... if there are x many ordered then the price is ..... these will be made with ..... these will be produced by.... and myself
      Is that allowed? I've been on other web sites that would lock the thread if I would have done that and wasn't a paying vendor.

    16. #16
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      still waiting for answers in post #24
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    17. #17
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by raustinss View Post
      still waiting for answers in post #24
      Can't answer all of those yet. I'll post something here when I have more information. Wouldn't I have to become a vendor in order to post something like you suggested?

    18. #18
      Join Date
      Dec 2010
      Location
      Fredericksburg, VA.
      Posts
      3,164
      Country Flag: United States
      You would be wise to become a vendor when the time comes because we are very supportive of our vendors and as a group are not afraid to spend money on quality parts. If you can make and sell CF parts at fiberglass prices you would likely do a good amount of business.

      IMO, all this banter could have been avoided if you had begun your post by saying you are making CF parts and trying to gauge interest in CF parts and bodies. Now that we understand the situation I for one am interested in what you got. Please provide more details.
      Steve Hayes
      "Dust Off"
      68 Camaro

      Support the RPM Act
      https://www.sema.org/rpm-faq.

    19. #19
      Join Date
      May 2016
      Posts
      57
      Quote Originally Posted by TheJDMan View Post
      You would be wise to become a vendor when the time comes because we are very supportive of our vendors and as a group are not afraid to spend money on quality parts. If you can make and sell CF parts at fiberglass prices you would likely do a good amount of business.

      IMO, all this banter could have been avoided if you had begun your post by saying you are making CF parts and trying to gauge interest in CF parts and bodies. Now that we understand the situation I for one am interested in what you got. Please provide more details.
      Sorry for the approach. Like I said, there are other sites that I did try to take that approach and the thread was quickly shut down because I wasn't a paying vendor, even though I didn't have a product to offer yet.

    20. #20
      Join Date
      May 2010
      Location
      kitchener,Ontario,Canada
      Posts
      2,359
      Country Flag: Canada
      i would agree because if you can match quality at discount prices .....id be in for some other chevelle parts
      Spinnin'my tires in life's fast lane

      Ryan Austin
      On twitter ... soon to be revived ...
      On Instagram ryanaustinss70

    Page 2 of 7 FirstFirst 1 2 3 4 5 6 7 LastLast



    Advertise on Pro-Touring.com