Project Silverfish

[1967marti]

I've been dragging my feet a little with this one. I had a lot going on with some big changes around the shop and having a few projects pop in and out for small repairs, but enough with the excuses and lets get started on this car. Owner is ok with a slower pace on this build so I'll do a better job at slowing down and showing the details.

Overview: The owner wants to drop a big engine and aftermarket transmission in this 65 fastback. Wants great handling and performance but stock(ish) appearance.

Build items to be completed:

Install convertible rockers
Build and install custom sub frame connectors
R/R entire floor
R/R trunk pan
R/R taillight panel
R/R rear window lower panel
R/R both rear frame rails
R/R drivers side rocker
R/R both rear torque boxes
R/R both rear quarter panels
R/R firewall
R/R Drivers B-pillar
R/R Cowl
R/R both inner and outer wheel tubs (both sides)
R/R both front frame rails
Install 2x front torque boxes
Install Triangulated 4-link (ridetech)
Install Roadster Shop IFS
Customize battery tray panel (smooth out to match drivers side)
Run fuel lines (efi) through frame rails and exit out of front passenger frame rail. (requires modification to inside of front frame rail)
Custom fiberglass valance
Custom under body fiberglass air scoops for rear brake cooling
Mini-tubs