Project Sicario by Speedtech

[Ben@SpeedTech]

Now we'll turn some attention to strengthening the under side of Sicario. First step was to install our new ExtReme crossmember and frame connectors. Superior to other kits these completely weld into the floor and connect the braces for both the front and rear frames, plus they tie into an equally stout crossmember that ties the rockers together. This design not only controls body twist front to back but also strengthens the car side to side. This particular kit is for use with our Torque Arm rear suspension, incorporating a mount for the front TA pin bushing. They do require a little more work than average frame connectors to install, including removing and later replacing the seat mounts plus doing a little surgery to have access to the rear frame bracing structure. In all however, the extra work is definitely worth the additional end result in strengthening the car. Follow along with some pics of the install...