Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 3 of 4 FirstFirst 1 2 3 4 LastLast
    Results 41 to 60 of 64
    1. #41
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States
      Continuing our theme through the interior we next addressed the rear package shelf. Mock ups for speaket layout were created digitally, test fit and then cut from wood and wrapped or laser cut from sheet metal and powdercoated. We chose Focal speakers for a great sound and they've got a really cool woven texture.









      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator


    2. #42
      Join Date
      Sep 2005
      Posts
      16
      Wow looks great! Thanks for the pics.

    3. #43
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States
      Thanks Jimmy!

      Rather than a replacement factory style carpet we chose to have a smoother look and opted for a custom carpet install. Note how jute padding was used to flatten the floorboards by filling in the bumps and valleys for a super clean look. More coming soon...





      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    4. #44
      Join Date
      Dec 2005
      Location
      Maryville, TN
      Posts
      844
      Nice build!! Digging the red pin stripe in the rendering.... which i guess is good since I did that on mine too! Can't wait to see more.

      Dan
      A.K.A: That bald guy
      Find me on Facebook or my personal website.

      - 67 Camaro: Current Project Car

    5. #45
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States
      Thanks Dan. Yep, there's something about black, gray and red.

      On with the engine bay. Our custom build 720 hp LS3 based Texas Speed engine came to us in a raw finish so a bit of flat black engine paint got it looking the way we wanted. Carrying the outside theme to the engine included a custom set of coilcovers, while all the accessories along with some interior parts were painted to match the exterior stripe. More coming soon...











      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    6. #46
      Join Date
      Sep 2016
      Posts
      44
      very nice

    7. #47
      Join Date
      Aug 2007
      Location
      Roanoke (FortWorth) Texas
      Posts
      786
      Might be better... IF IT WERE A MAVERICK!!!!!! LOL... Inside joke. I know they have access to one.


      Really is a nice car and handles great as well.
      Chris

      Total Cost Involved - Ridetech - Fatman - Total Control Products - Gateway Performance - MaverickMan Carbon

    8. #48
      Join Date
      Oct 2016
      Posts
      589
      WOW ! beautiful !

    9. #49
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States
      Thanks for the compliments!

      Chris- Jay has big plans for his Mav, but it's in cryo storage until his 73 Camaro is done, which may be this year!!
      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    10. #50
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States
      Some folks have asked about our new extended wheel tubs for the ExtReme subframe, here's a few shots of Sicario's. Note these will not work out of the box as is for any other subframe, they are contoured specifically for the ExtReme. The divits you see near the back side, omne near the brake master, are for the down tube brace bars.









      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    11. #51
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States
      More engine stuff, or rather how the exhaust fits with our extreme sub frames, torque arms and frame connectors. Several folks have been asking about this and as shown here we typically use dual 3" systems in most cars and send it out the back near the stock locations.

      The entire system pretty much lays out like any typical system. Getting around the panhard bar is probably the tightest spot but can be done fairly easy with plenty of clearance. We use fuel tanks that are "notched" on the front corners to give us a little more wiggle room for routing tubes. Rick's tanks supplies us with these stainless tanks already built this way.

      Note the first couple pics illustrate the channels that come with the ExtReme subframe connector kit to route fuel lines and e-brake cables.







      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    12. #52
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States








      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    13. #53
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States
      Finally we're caught up and ready to post some final pics. Overall the car turned out great and our customer was completely blown away at the end results. I had a chance to drive the car out for a photo shoot, and it rode great, is super responsive, sticks to the road and has incredibly smooth power. Overall the drive matched it's great looks.







      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    14. #54
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States






      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    15. #55
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States






      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    16. #56
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States






      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    17. #57
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States
      The full custom interior turned out fantastic! We used Speedhut for the custom Speedtech Signature Series ExtReme gauges, a Billet Specialties steering wheel and billet shifter surround add to the theme and vintage air takes care of HVAC duties.











      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    18. #58
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States
      Theme carried through on the made from scratch rear seats





      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    19. #59
      Join Date
      Jul 2013
      Location
      St. George, UT
      Posts
      1,144
      Country Flag: United States
      Shortly after completion we took the car to a Goodguys show to have on display at our vendor booth. The car was a big hit with spectators and we won a Goodguys Staff Pick award! That was pretty exciting!

      At last we gave the car back to it's owners and Dad Dave handed the keys over to son Mason who couldn't stop smiling. next up- Dad Dave's 1st gen Camaro gets the same ExtReme treatment!

      At this point we're anticipating having Sicario on display with us at our Speedtech Corral at LS Fest West in May. Come check it out in person!





      Last edited by Ben@SpeedTech; 03-14-2017 at 11:49 AM.
      -Ben, Creative Director at Speedtech Performance
      We sell some really cool parts, build cool cars, and do cool concept renderings too!
      435-628-4300 www.speedtechperformance.com
      My Pumkinator build thread- https://www.pro-touring.com/showthre...ght=pumkinator

    20. #60
      Join Date
      Oct 2016
      Posts
      589
      congrats ! she deverses it, nice built !

    Page 3 of 4 FirstFirst 1 2 3 4 LastLast



    Advertise on Pro-Touring.com