Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 3 of 3

    Hybrid View

    1. #1
      Join Date
      Dec 2004
      Location
      Scottsdale, AZ
      Posts
      778
      Country Flag: United States

      Gen V Lt1/C7 engine Fuel System

      We're stripping the C7 Vette. What do I need off the car to make the factory fuel system work? fuel pump? Is there a fuel pump module & harness?



      i have a ricks stainless tank to retro fit and make all this work.

      thanks!
      69 SS/350 Camaro
      AME Front & Rear LT Build
      69 SS/396 Camaro
      LT4 Build
      71 K5


    2. #2
      Join Date
      Jun 2001
      Location
      Newbury Park, CA
      Posts
      5,839
      Country Flag: United States
      The C7 uses an in-tank lift pump to move fuel to the engine mounted mechanical pump. The C7 in-tank pump may not lend itself well to fitting in an older chassis design.

      For a better fitment into our chassis/tanks a ZL1 pump would be appropriate based on the GM Performance fueling requirement for their crate engine. The crate engine fuel pump requirement is 45gph @ 72psi. The ZL1 can provide approximately 55gph @ 72psi, so it's a good fit.

      The OE system is also a pulse width modulated design incorporating a fuel system control module that communicates with the ECM via CAN. This can be accomplished by retrofitting the entire fuel system wiring and controller, or adapting a vaporworx pwm controller. The challenge here is that the ECM may start throwing codes if everything fuel system related is not functional.

      Are you planning on using the fuel pump driver/control system from the OE car?
      Last edited by CarlC; 10-30-2015 at 08:45 AM.
      VaporWorx. We Give You Gas http://www.vaporworx.com

    3. #3
      Join Date
      Dec 2004
      Location
      Scottsdale, AZ
      Posts
      778
      Country Flag: United States
      Quote Originally Posted by CarlC View Post
      The C7 uses an in-tank lift pump to move fuel to the engine mounted mechanical pump. The C7 in-tank pump may not lend itself well to fitting in an older chassis design.

      For a better fitment into our chassis/tanks a ZL1 pump would be appropriate based on the GM Performance fueling requirement for their crate engine. The crate engine fuel pump requirement is 45gph @ 72psi. The ZL1 can provide approximately 55gph @ 72psi, so it's a good fit.

      The OE system is also a pulse width modulated design incorporating a fuel system control module that communicates with the ECM via CAN. This can be accomplished by retrofitting the entire fuel system wiring and controller, or adapting a vaporworx pwm controller. The challenge here is that the ECM may start throwing codes if everything fuel system related is not functional.

      Are you planning on using the fuel pump driver/control system from the OE car?

      Carl - Thanks for responding. We are stripping the C7 to lighten it up for a hanging display so I can take anything I need to make it work. We’re not sure what will be required to make the whole thing work. My fail safe is to buy whatever parts are provided with the crate engine ECU kit.

      The shop & Car is in Torrance. Do you have any interest in getting together and developing a kit? Please call me if so. Corey 714-658-6291
      69 SS/350 Camaro
      AME Front & Rear LT Build
      69 SS/396 Camaro
      LT4 Build
      71 K5


    Advertise on Pro-Touring.com