Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Aug 2004
      Location
      Ontario, Canada
      Posts
      2,314
      Country Flag: Canada

      Door Mirror Mounting

      I have my door pads off to clean and lube my door latches and thought I would finally
      put a mirror on the passenger door before I button everything up. When I pulled the
      drivers outside mirror off I noticed there is a pretty hefty piece of metal mounted to
      the inside of the door that the mirror mounting bracket screws to putting the door skin
      between them. I checked the passenger door and this piece is missing, probably because
      there wasn't a mirror there.
      Does anybody make these reinforcement brackets or am I on my own?

      Ken

      If there is a hard way to do something, I'll find it!
      My other car is a Vega.


    2. #2
      Join Date
      May 2005
      Posts
      408
      Kenova,
      You probably will have to make your own plate.
      I would drill holes in the bracket then glue
      it to the under side of the door to hold it in place.
      Also look at our Clear Shot Mirrors that will Eliminate the
      Passenger side Blind Spot.No matter where you bolt any other
      mirror you will not be able to adjust it in far enough to see the lane
      beside you. You can get a discount by being a forum member.
      Install our mirrors and you are Safe and you won't have to do it again.
      No more floppy mirror and you can change lanes safely.

      Thx

    3. #3
      Join Date
      Aug 2004
      Location
      Ontario, Canada
      Posts
      2,314
      Country Flag: Canada
      I guess I get to be creative.

      Ken
      If there is a hard way to do something, I'll find it!
      My other car is a Vega.

    4. #4
      Join Date
      Oct 2010
      Location
      Sacramento, CA
      Posts
      246
      Country Flag: United States
      Check out a 70's or eighties car with a passenger mirror. I found some of the reinforcement plates will come off when you remove the mirror.
      Rick - 1969 Camaro - LS1 driven daily




    Advertise on Pro-Touring.com