Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6
    1. #1
      Join Date
      Jan 2011
      Posts
      12

      Art Morrison IRS/Multilink

      Looking for real world feedback on Art Morrison IRS/Multilink,the GOOD,the BAD and the UGLY. LOL I know Mary Pozzi has one in her Camaro and have read about it in some of the write ups.Just haven't seen any real world feedback from anyone yet.Is it still to new ? Any feedback from David or Marry Pozzi would be great.



    2. #2
      Join Date
      Nov 2005
      Location
      Central California
      Posts
      2,050
      Country Flag: United States
      Just saw this and I'll reply ...

      The Good - You get modern technology with bulletproof parts. IRS offers more adjustability for "rear steer," camber, and toe, offers a comfortable ride and the ability to put power down when it's needed. Coil overs allow for simple change of coil springs and shock adjustments. The AME IRS has taken an already good car and made it that much better and as I drive it on the roadways, there's the comfort factor too. And once it's set, leave it alone and let the suspension do its job. This IRS was designed for a first-gen Camaro and as mine's a second-gen, see below. A first-gen is much easier for the install than what was needed to fit that mess 'o tubes and monster Dana 60 rear diff underneath my car.

      The Bad - You will have to have some mad fabrication skills and more than just hand tools to get this IRS underneath your car. Plan on major evisceration of the floor pan, cutting and patching the rear rails or replace them entirely with the ones that AME can supply. And you'll have to know how to weld and look at parts with "load path management" strongly in mind. We strengthened brackets and looked at each mounting perch with the idea that we could make it a stronger, more integrated, connection to keep it intact no matter what loads I threw at this suspension. So far, so good ... but remember, this is not a bolt-in system. You'll be spending hours underneath your car measuring and fabricating

      The Ugly - YOU!! You'll be cutting, welding, and then painting almost everything underneath the chassis and floor. I used a medium grey and was still blowing grey snot several months later. My hair, skin and probably my teeth ended up grey. But it was definitely worth it.

      Mary Pozzi
      mpozzi . . . '73 Camaro RS, '69 Camaro SCCA/Trans-Am vintage racer, and a 1989 R7U 1LE Players Challenge car.

      "STICK, you B*TCH!!!!!!"

      "It's not a horse. You can't train it!! "


    3. #3
      Join Date
      Aug 2005
      Location
      Hamilton, NJ
      Posts
      4,319
      Country Flag: United States
      Quote Originally Posted by mpozzi View Post
      .....I used a medium grey and was still blowing grey snot several months later. My hair, skin and probably my teeth ended up grey.
      Name:  FEDER-1-tmagSF.jpg
Views: 520
Size:  18.2 KB
      you sound like a real attractive gal
      Scott from NJ.

      Vent Windows Forever! ...

      Feather-light suspension, Konis just couldn't hold
      I'm so glad I took a look inside your showroom doors

    4. #4
      Join Date
      Dec 2013
      Posts
      179
      Country Flag: United States
      seeing how difficult it is to put in a 2nd gen doesnt give me any hope for my 3rd gen in the future..lol.

    5. #5
      Join Date
      Jan 2011
      Posts
      12
      Thanks Mary for the response.Will be putting IRS in a project car.Just wanted to make sure it is all that and a bag of chips compared to some of the other IRS out at this time.

    6. #6
      Join Date
      Nov 2006
      Location
      Mountain Springs, Texas
      Posts
      4,880
      Country Flag: United States
      I installed one in my 69 Camaro using the AME frame rails and some good advice from David. I replaced the floor and trunk floor at the same time so I modified them before installing them. I had a body jig to keep everything lined up. Once the frame rails were installed the shell went on the rotisserie to make the painting etc a little easier. The subframe connectors were also installed before it went on the rotisserie.

      I have a long way to go before I can comment on ride quality etc.

      Don
      1969 Camaro - LSA 6L90E AME sub/IRS
      1957 Buick Estate Wagon
      1959 El Camino - Ironworks frame
      1956 Cameo - full C5 suspension/drivetrain
      1959 Apache Fleetside




    Advertise on Pro-Touring.com