Results 1 to 4 of 4
Thread: CPP 7081rls-d
-
07-29-2015 #1
Registered User
- Join Date
- Jul 2015
- Posts
- 2
CPP 7081rls-d
Has anyone used there springs and if so what are your options on it. Second gen fbody
-
08-06-2015 #2
Registered User
- Join Date
- May 2014
- Posts
- 20
CPP 7081rls-d
I haven't tried the CPP springs but I have the Hotckis 2" lowering springs and they are perfect for street/track use. CPP produces great products, if you tend to stay in budget build territory also look at Custom Works. And give them a call Keith will really work with you on the set up of your car
08-09-2015 #3
Registered User
- Join Date
- Jul 2015
- Posts
- 2
Thank you for your reply I have and am looking into customworks. Just had a chance to pick up the rear spring setup from a friend of a friend who is unloading his project car and all associated parts he had purchased for it. Crazy story but basically he found his dream car and so has to liquidate his other project due to wife's request/ money. But was unsure as to the quality, ride height, etc of the CPP setup. Hate to spend my limited funds to experiment so to speak.
08-11-2015 #4
Registered User
- Join Date
- May 2014
- Posts
- 20
CPP 7081rls-d
It all depends on what kinda setup you're running for the car too. (autocross,track, cruise)
And call the tech lines too! Cause they have great information and great advice!
Reply With Quote
