My Ride Tech lower Strong arms are too narrow!

['71cutlasluvr]

^^^^^^ Exactly what he said, this is not a nightmare! Had a similar issue with my strong arms on my 67 Camaro. Alittle persuasion, few cuss words and patience, problem solved. I called their tech line for a different issue with their spindle hardware, no questions asked new hardware arrived within 3 days. Things happen, be happy ridetech is so great to work with

Thanks for the input matt, but a little persuasion didn't cut it this time. (read my post and look at how bent up the pocket's ears are in the pics) I am normally a very patient person... losing patience usually leads to breaking stuff, so I try to contain it. But in this case, the SA's I got were not correct for my chassis. Perhaps "nightmare" is a bit too strong of a term, so I retract it, but after several days of hits and misses, sore muscles and bent up frame pockets, cussing just wasn't cutting it and the frustration meter was redlined. So you'll have to forgive my rant... I was not a happy camper and my posts obviously showed that.



But as you say, ridetech is great to work with and Darren found the fix. With the inside dimension being correct (from 8 5/8" to 8 3/4"), I have no doubt the new SA's will fit like a glove and I can move forward with this long term project.