1988 Trans Am Pro Tour/Auto-X Build

[ed1le]

I like the LS backed by the Super T-10. I know a guy that's doing the same combo in his '82 Camaro autoX car. Strong trans and you'll never rarely even been in 3rd much less needing a 5th and 6th gear!

[Interceptor5588]

Make sure you use a Hydramat fuel intake of some kind, those cars are notorious for fuel starvation at anything below 1/3 tank.

[monkey-leader]

Make sure you use a Hydramat fuel intake of some kind, those cars are notorious for fuel starvation at anything below 1/3 tank.

I think the 4th gen F-Body fuel pumps baffle/bucket should be fine. If it winds up being a problem I was thinking of making some sort of surge tank.

[RT66ProTouring]

Use an LS1 fuel pump sender.
Install an AN6 to 16mm x 1.5 adapter at the stock fuel line.
Install a Tee adapter at the on the Tee adapter.
Connect the Tee adapter to the pump using female quick connect to AN6 adapers.
Run a fuel line back to the pumps return from the Tee adapter.
Remove the stock return and EVAP lines.
Remove the rubber fuel line at the engine compartment end of the fuel line.
Install an AN6 to 16mm x 1.5 adapter on the engine compartment side of the fuel line.
Connect to the LS using a quick connect to AN6 adapter.

I haven't decided how I'll plumb my tank yet. Not sure I'm following what you are doing here. Can you post some pics when you are done?