Results 1 to 7 of 7
Thread: Fuel Injector ID
-
05-02-2015 #1
Registered User
- Join Date
- Feb 2012
- Location
- Mocksville, NC
- Posts
- 331
Fuel Injector ID
Need help identifying these injectors. They are Siemens Deka injectors, there's a 42 on one side and on the other side is a part number I can barely make out. Last 3 numbers are 405. They are black with gray bottoms. I've checked the part numbers list and mine's not on there. These are several years old and they may have changed part numbers. I'm assuming the 42 on one side could be the lb rate? Thanks.
1968 Charger R/T, EFI,SC,6-speed
-
05-04-2015 #2
Registered User
- Join Date
- Jan 2006
- Location
- Miami, FL
- Posts
- 166
Are you sure they are Siemens? Black and gray sound like Rochester/Delphi. Can you post a pic?
05-04-2015 #3
Registered User
- Join Date
- Feb 2013
- Location
- South Carolina
- Posts
- 935
Picture would help.
I design fuel injectors for SMP and have an extensive database on-hand. Even a partial part number might help with the identification.
BTW, only an aftermarket supplier would print the injector flow on the part and even then it is rare. 42 is not likely a reference to flow.
05-04-2015 #4
Registered User
- Join Date
- Feb 2012
- Location
- Mocksville, NC
- Posts
- 331
Here's a few pics. The part # is F111405.
1968 Charger R/T, EFI,SC,6-speed
05-05-2015 #5
Registered User
- Join Date
- Jan 2006
- Location
- Miami, FL
- Posts
- 166
05-05-2015 #6
Registered User
- Join Date
- Feb 2013
- Location
- South Carolina
- Posts
- 935
We never matched that particular injector. I can help you with comparable flows/part numbers if you need them.
05-05-2015 #7
Registered User
- Join Date
- Feb 2012
- Location
- Mocksville, NC
- Posts
- 331
Yup, that's the info I need. Thanks again!!
1968 Charger R/T, EFI,SC,6-speed
Reply With Quote
