Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 14 of 14

    Thread: Bbc questions

    Threaded View

    1. #1
      Join Date
      Apr 2015
      Location
      Goodyear, AZ
      Posts
      23
      Country Flag: United States

      Bbc questions

      I have been researching and have a hard time understanding some of the information I have been reading about high rpm and low end torque. I have a 1968 Chevelle SS I will be driving on the street. I want it to be able to run very well and not be a huge monster like the 496 or bigger. The car so far has 3.73 rear gears, 700R4 (all rebuilt and set up for at least 600hp) 2500 stall converter. Now here is my questions, I have been thinking about going 454 which everyone says if your going big get all you can or destroking a 454 to a 427. I could use a 396 crank and change the pistons and keep rods. What are the pros and cons of these two possibilities for my application?






    Advertise on Pro-Touring.com