Results 1 to 8 of 8
Hybrid View
-
04-29-2016 #1
Registered User
- Join Date
- Apr 2016
- Location
- clarkston, mi
- Posts
- 84
for you guys that use the jeep cherokee center steering link, the rubber on the part that goes to the steering wheel shaft can come loose if it is near the header, my schoenfield header was really close to the rubber part of center shaft and cause the rubber to slip. i flattened out the metal that was over the rubber, about 3/16" and put a 5/16" bolt thru the metal on the outside and the shaft in the middle. there was no slippage when the car was running, but when i was pushing it into the garage (motor not running) i heard a strange noise, then i found the steering wheel was not centered, rubber slipping. it would be a bad feeling to turn the steering wheel and the tires do not turn.
-
Reply With Quote
