4 link jig

[Twinstang]

Does someone sell a Jig to weld the upper control arm links on for a 4 link I thought chassisworks sold one but I can't seem to find it. Trying to figure out the proper angle to make a cantered 4 link setup in a 67 Camaro.

[TheJDMan]

You mean a Jig? I also assume you mean the upper link brackets on the axle housing? For what rear end? I know Chassisworks provides a jig with their 4link kits but I don't know if they sell one outright. Your best bet would be to call them and ask for Carl he is a member here.

[Twinstang]

Lol.... Sorry that's what happens when your kids demand your attention and try and type on a phone in a hurry

[camrat68]

You can buy the jig from Chassisworks. I know I kept mine for mounting to a 12-bolt in a 68 Camaro rather than getting the refund.

-Jim

[Carl @ Chassisworks]

Steve and Jim, thanks for the good word!

We offer a upper control arm fixture with our g-Bar and g-Link. It's available separately, in many configurations, through our E-Store here: http://www.cachassisworks.com/c-1291...res-g-bar.aspx

[Twinstang]

Thanks guys, I knew I saw it somewheres before